Pace Plumbing
Toilet Repair and Replacement in Spokane, WA

Common Problems with Household Toilets

Toilets are one of the most frequently used fixtures in any home, so it’s no surprise that they encounter problems from time to time. Understanding these common issues can help you know when it’s time to call in the professionals. Here are some of the most frequent toilet complaints we address at Pace Plumbing:

Weak Flush

A weak flush is a common issue that can be caused by several factors, including a clogged rim jet, a flapper that doesn’t lift completely, or low water levels in the tank. This problem can be frustrating, especially when it requires multiple flushes to clear the bowl. Our team can quickly diagnose the cause and restore your toilet’s flushing power.

Incomplete Flush

If your toilet isn’t fully flushing, it may be due to a partially closed flapper or an issue with the tank’s water level. An incomplete flush not only leaves waste behind but can also lead to clogs if not addressed. We can adjust or replace the flapper and ensure the tank’s water level is correct for optimal performance.

Tank Overfilling

An overfilling tank is often the result of a faulty fill valve or an improperly adjusted float. This issue can cause water to continuously run into the overflow tube, wasting water and increasing your utility bills. Our plumbers can replace the fill valve or adjust the float to stop the overflow and save you money.

Low Water Level in Bowl

A low water level in the toilet bowl can be due to a partial clog, an improperly installed or cracked bowl, or a problem with the vent stack. This issue not only affects flushing power but can also lead to sewer odors in your home. We’ll identify the root cause and provide a solution that restores your toilet’s functionality.

Double Flush

A double flush occurs when too much water flows into the bowl, often due to a flapper issue. While it may seem like a minor inconvenience, it can waste water and indicate a deeper problem. We’ll inspect the flapper and other components to ensure your toilet flushes efficiently with just one push.

Noisy Tank Filling

A noisy tank can be caused by high water pressure, a faulty fill valve, or a clogged valve. This can be annoying, especially if it wakes you up at night. We can adjust the water pressure, clean or replace the valve, and eliminate the noise.

Slow Tank Fill

If your toilet tank is filling slowly, it’s often due to a clogged fill valve or low water pressure. This problem can delay the toilet’s readiness for the next flush, causing inconvenience. We’ll clean or replace the fill valve and check your home’s water pressure to resolve the issue.

Dripping Noise After Filling

A dripping noise after the tank has filled usually indicates a worn flapper or a bad seal in the tank. This can lead to water wastage and higher utility bills. We’ll replace the flapper or seal to stop the drip and ensure your toilet operates efficiently.

Slow Flush

A slow flush can occur due to a clog in the trap, a full or partially blocked vent pipe, or insufficient water in the tank. This problem can lead to frequent clogs and inadequate waste removal. We’ll clear the clog, inspect the vent pipe, and adjust the water level to improve the flush.

Gurgling in Sink or Tub

Gurgling sounds in your sink or tub when you flush the toilet often indicate a blocked vent stack or sewer line issue. This is a serious problem that can lead to backups and require immediate attention. Our team will inspect your plumbing system and clear any blockages to prevent further damage.